P 10 Q

Speaker Description

The high power 10” Alnico in the Vintage Series, the P10Q was used in a handful of beautifully sounding amps such as the Tweed Super, Brownface Super, and others. This speaks to the fierce tone of the P10Q, capable of great clarity, detailed tone with excellent trebles, and well supported by a solid mid and bass foundation.

Description

Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, loudspeaker mounted on enclosure
Power on Continuous Program is defined as 3 dB greater than the Rated Power
Thiele and Small parameters measured with laser system withou preconditioning test
The notch around 400 Hz on the frequency response is typical of the measurement on IEC baffle
Due to continuing product improvement, the features and the design are subject to change without notice.

Additional information

Nominal Diameter	259 mm / 10 in, 306 mm / 12 in
Nominal Impedance	8 Ω
Rated Power AES	40 W
Continuos Program Power	80 W
Sensitivity @ 1W/1m	93.8 dB
Voice Coil Diameter	32 mm (1.25")
Voice Coil Winding Depth	8 mm
Magnetic Gap Depth	6 mm
Flux Density	1.05 T
Magnet Weight	300 g
Net Weight	1.6 Kg
Re	5.57 Ω
Qms	9.96
Qts	1.44
Cms	159 µm/N
Vas	24.4 l
Fs	89.9 Hz
Mms	19.7 g
Bxl	6.07 Tm
Sd	330.1 cm²
Le (1KHz)	0.52 mH
Magnet Type	AlNiCo
Basket Material	Pressed Sheet Steel
Voice Coil Winding Material	Copper
Voice Coil Former Material	Nomex
Cone Material	Paper
Surround Treatment	No
Surround Material	Paper – Integrated
Dust Dome Material	Solid Paper

ZJ05110.pdf

Speaker Description

Description

Additional information

Sica information

Sica contacts

quick link

Ⓒ SICA Loudspeakers - All Rights Are Reserved