C 12 Q

Speaker Description

Following the heritage of the P12Q, the C12Q is one of the most versatile speakers in the Vintage range. Powerful enough for a cranked Deluxe-style amp yet balanced and warm, it surely is not lacking in bite. It has been used in both single and twin configurations by countless manufacturers including Fender®, Ampeg®, Silvertone® and Supro®, just to name a few.

Description

Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, loudspeaker mounted on enclosure
Power on Continuous Program is defined as 3 dB greater than the Rated Power
Thiele and Small parameters measured with laser system withou preconditioning test
The notch around 400 Hz on the frequency response is typical of the measurement on IEC baffle
Due to continuing product improvement, the features and the design are subject to change without notice.

Additional information

Nominal Diameter	306 mm / 12 in
Nominal Impedance	8 Ω
Rated Power AES	35 W
Continuos Program Power	70 W
Sensitivity @ 1W/1m	93.2 dB
Voice Coil Diameter	32 mm (1.25")
Voice Coil Winding Depth	9 mm
Magnetic Gap Depth	6 mm
Flux Density	0.92 T
Magnet Weight	426 g
Net Weight	1.8 Kg
Re	6.00 Ω
Qms	12.95
Qts	2.23
Cms	111 µm/N
Vas	38.0 l
Fs	87.5 Hz
Mms	29.7 g
Bxl	6.03 Tm
Sd	490.9 cm²
Le (1KHz)	0.63 mH
Magnet Type	Ferrite
Basket Material	Pressed Sheet Steel
Voice Coil Winding Material	Copper
Voice Coil Former Material	Epotex
Cone Material	Paper
Surround Treatment	No
Surround Material	Paper – Integrated
Dust Dome Material	Solid Paper

ZJ06180.pdf

Speaker Description

Description

Additional information

Sica information

Sica contacts

quick link

Ⓒ SICA Loudspeakers - All Rights Are Reserved