C 10 Q

Speaker Description

Adopted primarily in the Vibrolux® and Vibroverb® amps of the Brownface and Blackface era, the C10Q is a very easy to drive speaker that breaks up nicely with straightforward biting character. It was also very common in many Silvertone® and Valco® amps. It loves the 2×10 configuration and the floating baffles.

Description

Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, loudspeaker mounted on enclosure
Power on Continuous Program is defined as 3 dB greater than the Rated Power
Thiele and Small parameters measured with laser system withou preconditioning test
The notch around 400 Hz on the frequency response is typical of the measurement on IEC baffle
Due to continuing product improvement, the features and the design are subject to change without notice.

Additional information

Nominal Diameter	259 mm / 10 in
Nominal Impedance	8 Ω
Rated Power AES	35 W
Continuos Program Power	70 W
Sensitivity @ 1W/1m	94.7 dB
Voice Coil Diameter	32 mm (1.25")
Voice Coil Winding Depth	9 mm
Magnetic Gap Depth	6 mm
Flux Density	0.92 T
Magnet Weight	426 g
Net Weight	1.6 Kg
Re	6.00 Ω
Qms	9.78
Qts	1.30
Cms	150 µm/N
Vas	23.2 l
Fs	96.0 Hz
Mms	18.3 g
Bxl	6.64 Tm
Sd	330.1 cm²
Le (1KHz)	0.62 mH
Magnet Type	Ferrite
Basket Material	Pressed Sheet Steel
Voice Coil Winding Material	Copper
Voice Coil Former Material	Epotex
Cone Material	Paper
Surround Treatment	No
Surround Material	Paper – Integrated
Dust Dome Material	Solid Paper

ZJ05060.pdf

Speaker Description

Description

Additional information

Sica information

Sica contacts

quick link

Ⓒ SICA Loudspeakers - All Rights Are Reserved